Epson 1390 Resetter Communication Error
Epson 1390 Resetter Communication Error ->>> https://cinurl.com/2tvbOX
How to Fix Epson 1390 Resetter Communication Error
If you are trying to reset your Epson 1390 printer using a resetter program, you may encounter a communication error that prevents you from completing the process. This error may show up as Error code: 21000068 or Error code: 20000104 on your screen. In this article, we will show you how to fix this error and successfully reset your printer.
What causes Epson 1390 resetter communication error
The communication error occurs when the resetter program cannot communicate with the printer properly. This may be due to several reasons, such as:
The printer is not connected to the computer correctly.
The printer driver is outdated or corrupted.
The resetter program is incompatible with your printer model or operating system.
The printer is in an error state or has low ink levels.
How to fix Epson 1390 resetter communication error
To fix the communication error, you need to follow these steps:
Make sure that your printer is connected to your computer via a USB cable. Avoid using a hub or an extension cord.
Turn off your printer and unplug it from the power source. Wait for a few minutes and then plug it back in and turn it on.
Download and install the latest printer driver from the official Epson website. You can find the driver for your printer model here: https://epson.com/Support/Printers/Single-Function-Inkjet-Printers/Epson-Stylus-Series/Epson-Stylus-Photo-1390/s/SPT_C11C655051
Download and run the compatible resetter program for your printer model and operating system. You can find the resetter program here: https://www.waredata.com/resetter-epson-sp-1390/
Select your printer model and port from the drop-down menu and click Particular adjustment mode.
Select Waste ink pad counter and click OK.
Check the boxes for Main pad counter and Platen pad counter and click Check.
Click Initialization and wait for the process to complete.
Click Finish and close the resetter program.
Turn off your printer and wait for a few seconds. Then turn it on again and check if the error is gone.
Tips for avoiding Epson 1390 resetter communication error in the future
To prevent the communication error from happening again, you should:
Avoid resetting your printer too frequently. Only reset it when the waste ink pad counter reaches its limit.
Maintain your printer regularly by cleaning the print head, replacing the ink cartridges, and removing any paper jams.
Avoid using third-party or refilled ink cartridges that may damage your printer or cause ink leakage.
Avoid turning off your printer abruptly or unplugging it while it is in use.
Epson 1390 resetter communication error is a common problem that can be fixed by following some simple steps. By ensuring that your printer is connected properly, updating your printer driver, using a compatible resetter program, and resetting your printer correctly, you can resolve this error and enjoy printing again. If you have any questions or suggestions, please leave a comment below. aa16f39245