LaserCut 5.3 is the software that Bumblebee and Wolverine use to convert 2D layouts to an MOL file that can be read by the laser cutter The user can either do simple layouts directly in this software, or import layouts / drawings that were made in other software such as Adobe Illustrator, Inkscape, AutoCAD, etc.
LaserCut is installed on the Laser cutter laptop, which lives on the desk next to bumblebee. One way to get your files to the laser cutter is to bring a flashdrive or download your files off of dropbox, etc and use LaserCut on the laptop to export the MOL files to the laser cutter. However, you can also now set up LaserCut on your personal laptop, which means you can get everything set up while hanging out in the commons area (or at home if you plan ahead) and then pop over to the laser only when you're totally ready.
LaserCut can turn regular cut lines into dashed lines which the laser will then cut in one continuous motion. You could also make dashed lines manually with many small individual cut paths, but the laser would spend a significant amount of additional time accelerating and traveling between dashes. To make a dashed line:
finally after getting back into the warehouse after all these crazy times we are finally getting our Blacknose 40W cutter set up! I wonder if you might be able to help us a little!? We are using the 5.3 laser cutter software and have downloaded the software for Windows 8, however we seem to be getting a communications error when we try to download the design to cut. The cutter works fine if we copy the designs on to a memory stick, but obviously ideally we want to run the designs straight off the computer through the cable.
Hi, I have the HPC laser and I found I got this error, but after speaking to someone who told me to plug the USB lead direct into the motherboard as the connection at the side of the machine usually breaks with the way the cable is constantly hanging. No problems since doing that. Hope this helps.
Having problems with your laser cutter or software? Try our new community forum: Getting the installation program The Lasercut 5.3 installation files can be downloaded here. Extract the files from the zipped...
Your laser cutter driver file will not install on Windows 10 as it is designated unsigned by Microsoft. On previous distributions of Windows, a click-to-continue button allowed the installation of unsigned drivers. In Windows 10 you must enter a...
The K40 is a cheap chinese made laser cutter with terrible software mostly written in chinese and requiring a dongle to use. But, it has been reverse engineered by Scorchworks to control the Laser Cutter directly and get all the resulting bells and whistles from that process. So it directly loads Inkscape svg (and others) files and uses them to control the laser cutter. Turning what was a pretty terrible experience into something more reasonable. But, it also means that Inkscape is one of the primary ways people use the device. Scorchworks K40.
The eggbot is a open-source art robot that can draw on spherical or egg-shaped objects. The Inkscape eggboot extension eases the design process for writing and drawing on eggs. However, some of its functionality can be useful for laser cutting and engraving, in particular the Hershey fonts which generate drawings (glyphs as opposed to fonts).
Are you looking for a free or commercial software to run with your laser engraver cutting machine? Are you worried about which laser cutter engraving software to choose? Don't worry, in the following article, we will take you to explore 15 common and powerful Windows-based best laser engraver cutting software, as well as some software designed for macOS and Linux.
LaserCut control software makes full use of the high-speed data processing capability of DSP and the powerful logic processing capability of FPGA, and organically combines motion trajectory control and laser control to realize the coordination and synchronization between the laser system and the motion system, and simultaneously control the laser energy and motion speed. Organic connection to achieve energy balance control. It supports CO2 glass tube and RF tube laser, low power fiber laser used for laser engraver cutting machine.
CypCut laser cutting software is an easy-to-use laser cutter control system with comprehensive functions. It is a software specially developed for deep customization of the laser cutting industry. It is easy to use and has rich functions, and is suitable for various processing occasions. Using this software can easily and quickly carry out laser cutting management operations. Users can freely control the cutting angle, size, etc., and have functions such as adding layout sidebars, cleaning nozzles, and exchanging workbench control modules. CypCut is a laser cutting software that is deeply loved by users and friends. It supports operations such as importing graphics, editing and drawing, and adding leads. Supports adding nesting sidebars, cleaning nozzles, and exchanging workbench control modules.
CypOne controller software is a practical laser cutting system, which supports drawing processing, tool path planning, process setting, focus control and other functions, and is suitable for medium and low power laser cutting machines. CypOne is a multi-functional and cost-effective control software specially developed for the thin sheet metal/advertising processing industry. It is suitable for medium and low power laser cutting machines, and can realize rich functions such as drawing processing, tool path planning, process setting, focus control, table exchange, which is convenient, fast, high-quality and efficient to do laser cut. CypOne can help users control the machine and achieve precise cutting work. There are rich functions in the software, allowing users to easily adjust the parameters to achieve the desired cutting effect. The software is suitable for medium and low power laser cutting machines, and can control the machine well for work.
RDWorks is a powerful laser cutting software used for cutting operations in various projects. It is compatible with various mainstream motherboard models and is compatible with commonly used file formats, including DST, DSB. The software It provides powerful import and export functions, and supports fast cutting and custom cutting parameters. The installation program includes a USB driver, and the user interface of the software includes the viewing of various documents, user links, output settings, processing settings, can define the software language and use type, and can adjust the screen resolution. For quick settings, the software can also adjust various colors according to your needs. The intuitive user interface allows you to easily get started with the software. It is recommended that the screen display area be 1024*768 or higher resolution rate, supports a variety of motherboard models. RDWorks supports most of RUIDA controllers. The software supports vector files, image files, CAD files, image and text cutting functions, curve cutting functions, CAM functions, graphics output functions, and supports multi-language versions.
EZCAD is a laser engraver controller software, which is popular for all types of laser marking machines. It can freely design and edit the processed patterns, such as breaking up the lines, combining, cutting, dragging, drawing and other operations on the pattern. You can also freely draw various vector lines such as points, lines, circles, polygons, free lines, and arcs. It supports a rich font library, including its own fonts and a variety of third-party fonts such as TrueType fonts, monoline fonts (JSF), SHX fonts, and bitmap fonts (DMF). It supports editing and automatically generates 1D barcodes and 2D barcodes in various formats. It provides rich and flexible variable text processing, can automatically generate serial numbers and numbers in arbitrary bases, and set up a variety of hopping rules to achieve: production date, time, week, days and other counting and automatic hopping functions, during processing Change the text in real time, you can directly read and write TXT text files and Excel files dynamically. It can automatically split the text when rotating and splitting marking, which is suitable for more complex marking occasions. It supports direct import of various image formats (BMP, JPG, GIF, TGA, PNG, TIFF) and vector graphics (AI, DXF, DST, PLT) for m